TCCoA Forums - View Single Post - B&M AT Cooler Install Location & Details Needed

View Single Post
post #3 of (permalink) Old 04-17-2017, 12:21 PM Thread Starter
Glenn
3rd Gear Poster
 
Glenn's Avatar
 
Join Date: Feb 2012
Location: Atlanta, GA
Posts: 125
I am trying to run the B&W cooler lines from the center of the condenser area where I mounted the new cooler over to the DS edge of the radiator - past this area to under the battery and then up to the top of the OEM radiator cooler line. I do not want to cut the OEM steel AT lines. I want to just unscrew the top OEM cooler line and connect one of the B&W cooler hoses to the top of the OEM cooler outlet fitting and then the other B&W hose to the OEM steel line that used to go to this OEM cooler outlet fitting. I am trying not to run the B&W hoses down to the bottom of the radiator and then up to the OEM cooler outlet area. I am trying to find a shorter path as I described above.

Any comments appreciated.

Thanks,

Glenn

1996 TB LX, 4.6, 120,000 miles, black with tan interior.
Dark tint and OEM "Sport" spoiler.
Glenn is offline  
 
 
For the best viewing experience please update your browser to Google Chrome