Part numbers for OEM parts - TCCoA Forums

 
LinkBack Thread Tools
post #1 of 28 (permalink) Old 04-07-2008, 12:33 PM Thread Starter
High-Mileage 4.6L Thrasher
Moderator
 
Johnny Langton's Avatar
 
Join Date: Jul 2002
Location: Texas
Posts: 3,232
Part numbers for OEM parts

Here are some part numbers for 4.6L/5.4L items that are obscure,or are difficult for the parts guys to find sometimes:

XR3Z-18B402-DA Water tube for Cooling mod(fits back of cylinder head in place of freeze plug)

I'll update this with alot of part numbers over the next few days-if you have any part numbers that I don't have-post them here,and I'll keep this edited.
JL

1997 Thunderbird-4.6L/4R70W.....12.16@111.77
'05 F250 Crewcab 2WD-6.8L V10/5R110/4.10
2010 Lincoln MKT-3.5L EcoBoost V6/AWD....14.41@96.27-stone stock
Fuelly
Johnny Langton is offline  
post #2 of 28 (permalink) Old 04-07-2008, 09:38 PM
Refrigerator Raider Hater
Moderator
 
GreenBird's Avatar
 
Join Date: Jul 2002
Location: Vermont
Age: 33
Posts: 11,719
SVO Intake original part list, as the kit is no longer to be had.
http://members.tccoa.com/greenbird/Temp/img001.pdf

Matt "Looks Like Egon" Davis
96 Alpine Green V8
98 Audi A8 4.2Q in Racing Green Totalled
02 Audi A8L 4.2Q in Black

I buy my OEM Ford parts at 10% over dealer cost from Steve in White Bear Lake, MN.
You drive "like a man possessed"... by a woman!
GreenBird is offline  
post #3 of 28 (permalink) Old 05-29-2009, 07:10 PM
Banned
 
Join Date: Dec 2008
Location: London, Ontario
Posts: 754
hey is that cooling mod needed for a 96 cougar 4.6L ???
BigJohnny is offline  
post #4 of 28 (permalink) Old 07-22-2009, 04:20 AM
2nd Gear Poster
 
Join Date: Jun 2006
Location: Birmingham, AL
Posts: 73
Speaking of obscure parts, does anyone know a part number, Ford or otherwise, for a 1995 4.6L V8 PCV valve elbow? It is in the middle or so of the photo, the bright black piece.

raider82 is offline  
post #5 of 28 (permalink) Old 02-10-2010, 10:47 PM
PostWhore
 
CrystalPistol's Avatar
 
Join Date: Aug 2003
Location: Shenandoah Valley
Age: 63
Posts: 1,027
Quote:
Originally Posted by Johnny Langton View Post
Here are some part numbers for 4.6L/5.4L items that are obscure,or are difficult for the parts guys to find sometimes:

XR3Z-18B402-DA Water tube for Cooling mod(fits back of cylinder head in place of freeze plug)

I'll update this with alot of part numbers over the next few days-if you have any part numbers that I don't have-post them here,and I'll keep this edited.
JL
That was April 7, 2008.

It's February 10, 2010.


A fine pair ... ... and whatever you do, Have a Safe Trip!
CrystalPistol is offline  
post #6 of 28 (permalink) Old 10-16-2010, 08:26 PM
No, Mr. Lemmywinks, No!!!

Moderator
 
Grog6's Avatar
 
Join Date: Jun 2005
Location: Harriman, TN
Age: 54
Posts: 8,339
Does anyone know the part number or exactly which cars have the 02+ GT maf besides the mustang?

Red '96 Cougar XR-7 240k mi. '02 4R70W, PST DS : '03 PI engine, 04 maf, 24lb injectors, 2.5" exhaust, '02 4r70w + Jmod, DirtyD0g TC + cooler + 3/8" lines, 255 walbro fp. Alpine system.
Black '96 Cougar XR-7 (Lazarus) 210k mi PI Intake, '02 4R70W, Jmod, PST DS, GrogTune, Konis, Mark LCA+Poly, racecougar Custom Engine Chain, and JL and racecougar Bracing.
Black '97 Tbird Limited Edition, '02 4R70W, 255 walbro, PST DS, PBR Brakes&SS lines, Toicko Blues & Springs, GrogTune.

I'm not Human enough to be human; but I'm trying to fit in, and I'm learning to fake it.

"Never said Hibbity..." - Brian Williams
Grog6 is offline  
post #7 of 28 (permalink) Old 10-16-2010, 08:36 PM
Seasoned PostWhore
 
theterminator93's Avatar
 
Join Date: Jan 2009
Location: Avon Lake, Ohio
Age: 29
Posts: 8,677
Garage
YC2F-12B579-BA

I got mine off an F150.

-Brandon
97 Laser Red Thunderbird LX 156k, Stage 2 4.6L 2v N/A | 300 BHP (255 RWHP, 290 RWTQ) | 13.95 @ 97.58 | Build details | Pics at the Lorain Assembly plant
96 Ivory Mark VIII 235k, stock 4.6 32v on coils; New engine at 185k
Gone but not forgotten: 94 Cougar XR7, 93 Mark VIII

TCCoA's resident pilot since 2014
Once you have tasted flight, you will walk the world with your eyes turned skyward, for there you have been and there you long to return. -Leonardo da Vinci
theterminator93 is offline  
post #8 of 28 (permalink) Old 10-16-2010, 09:28 PM
No, Mr. Lemmywinks, No!!!

Moderator
 
Grog6's Avatar
 
Join Date: Jun 2005
Location: Harriman, TN
Age: 54
Posts: 8,339
Thanks! I didn't feel good calling the JY without a part number.

After some stuff that GM posted, I searched a bunch, and am going in with my 24# injectors and a new maf on my new pi engine.

Waiting for parts always makes me spend more money in the meantime, dangit! (lol)

On Car-parts.com they don't have them listed correctly; maybe the older ones will interchange for stock operation, idk.

Red '96 Cougar XR-7 240k mi. '02 4R70W, PST DS : '03 PI engine, 04 maf, 24lb injectors, 2.5" exhaust, '02 4r70w + Jmod, DirtyD0g TC + cooler + 3/8" lines, 255 walbro fp. Alpine system.
Black '96 Cougar XR-7 (Lazarus) 210k mi PI Intake, '02 4R70W, Jmod, PST DS, GrogTune, Konis, Mark LCA+Poly, racecougar Custom Engine Chain, and JL and racecougar Bracing.
Black '97 Tbird Limited Edition, '02 4R70W, 255 walbro, PST DS, PBR Brakes&SS lines, Toicko Blues & Springs, GrogTune.

I'm not Human enough to be human; but I'm trying to fit in, and I'm learning to fake it.

"Never said Hibbity..." - Brian Williams
Grog6 is offline  
post #9 of 28 (permalink) Old 10-16-2010, 09:35 PM
Moderator & Teksid Whore
Super Moderator
 
guitar maestro's Avatar
 
Join Date: Jul 2002
Location: Laredo, Texas
Age: 37
Posts: 11,937
Send a message via MSN to guitar maestro Send a message via Yahoo to guitar maestro
Quote:
Originally Posted by Grog6 View Post
Thanks! I didn't feel good calling the JY without a part number.

After some stuff that GM posted, I searched a bunch, and am going in with my 24# injectors and a new maf on my new pi engine.

Waiting for parts always makes me spend more money in the meantime, dangit! (lol)

On Car-parts.com they don't have them listed correctly; maybe the older ones will interchange for stock operation, idk.
Tell me about it....my engine will have more coatings than the space shuttle during this time that the drivetrain parts roll in

Let me know if you want to try out that modified injector delay table
guitar maestro is offline  
post #10 of 28 (permalink) Old 10-16-2010, 11:48 PM
No, Mr. Lemmywinks, No!!!

Moderator
 
Grog6's Avatar
 
Join Date: Jun 2005
Location: Harriman, TN
Age: 54
Posts: 8,339
I'd love to get a copy of the spreadsheets you have, GM; learning how to use them would go a long way toward learning this...

Where did you learn this tuning stuff?

Are there some good books/references you would recommend? I'd love to go to one of Greg Banish's seminars, but don't have time for much but reading. I have money, usually.

I hate it when one of my hobbies becomes another degree project, lol.

The last one was high speed current amplifiers; We use those now at work... I was doing Tesla coil experiments, lol.

Red '96 Cougar XR-7 240k mi. '02 4R70W, PST DS : '03 PI engine, 04 maf, 24lb injectors, 2.5" exhaust, '02 4r70w + Jmod, DirtyD0g TC + cooler + 3/8" lines, 255 walbro fp. Alpine system.
Black '96 Cougar XR-7 (Lazarus) 210k mi PI Intake, '02 4R70W, Jmod, PST DS, GrogTune, Konis, Mark LCA+Poly, racecougar Custom Engine Chain, and JL and racecougar Bracing.
Black '97 Tbird Limited Edition, '02 4R70W, 255 walbro, PST DS, PBR Brakes&SS lines, Toicko Blues & Springs, GrogTune.

I'm not Human enough to be human; but I'm trying to fit in, and I'm learning to fake it.

"Never said Hibbity..." - Brian Williams
Grog6 is offline  
post #11 of 28 (permalink) Old 10-17-2010, 12:15 AM
Moderator & Teksid Whore
Super Moderator
 
guitar maestro's Avatar
 
Join Date: Jul 2002
Location: Laredo, Texas
Age: 37
Posts: 11,937
Send a message via MSN to guitar maestro Send a message via Yahoo to guitar maestro
http://www.mediafire.com/efituningstuff

that file hosting website has pretty much everything I have on my computer....the injector spreadsheet is "Fuel Injector Timing Calculations"

the only book I have purchased is Greg Banish's first book on EFI tuning....I think his second one is out already, so I gotta check up on that one

aside from that, the SCT PRP private forum has a wealth of tuning information....I'm sure you already have access to that, right? If not, do so immediately and look up any and all posts by MitchB
guitar maestro is offline  
post #12 of 28 (permalink) Old 10-17-2010, 12:43 AM
No, Mr. Lemmywinks, No!!!

Moderator
 
Grog6's Avatar
 
Join Date: Jun 2005
Location: Harriman, TN
Age: 54
Posts: 8,339
will do, as far as sct goes.

I just looked at the other link; cool!

There's even more there than I remember.

Time to read for awhile.


Red '96 Cougar XR-7 240k mi. '02 4R70W, PST DS : '03 PI engine, 04 maf, 24lb injectors, 2.5" exhaust, '02 4r70w + Jmod, DirtyD0g TC + cooler + 3/8" lines, 255 walbro fp. Alpine system.
Black '96 Cougar XR-7 (Lazarus) 210k mi PI Intake, '02 4R70W, Jmod, PST DS, GrogTune, Konis, Mark LCA+Poly, racecougar Custom Engine Chain, and JL and racecougar Bracing.
Black '97 Tbird Limited Edition, '02 4R70W, 255 walbro, PST DS, PBR Brakes&SS lines, Toicko Blues & Springs, GrogTune.

I'm not Human enough to be human; but I'm trying to fit in, and I'm learning to fake it.

"Never said Hibbity..." - Brian Williams
Grog6 is offline  
post #13 of 28 (permalink) Old 07-03-2011, 12:11 PM
No, Mr. Lemmywinks, No!!!

Moderator
 
Grog6's Avatar
 
Join Date: Jun 2005
Location: Harriman, TN
Age: 54
Posts: 8,339
Radiator swap info...

First, a Cobra radiator is huge.

To fit the Mustang radiators of all types, use this lower radiator hose:

XR3Z8286AA

That's from here:

http://www.rockauto.com/catalog/rafr...&parttype=2057

Note that's for a "2000 FORD MUSTANG GT 4.6L 281cid V8 FI (X) SOHC "

This has the weird connection to the overflow tank, and has a 1.77" hose end, sized for the Mustang radiators.

This is much easier than stretching our hose from 1.25" to 1.7" and expecting it to last...

Hope this helps someone else!

Red '96 Cougar XR-7 240k mi. '02 4R70W, PST DS : '03 PI engine, 04 maf, 24lb injectors, 2.5" exhaust, '02 4r70w + Jmod, DirtyD0g TC + cooler + 3/8" lines, 255 walbro fp. Alpine system.
Black '96 Cougar XR-7 (Lazarus) 210k mi PI Intake, '02 4R70W, Jmod, PST DS, GrogTune, Konis, Mark LCA+Poly, racecougar Custom Engine Chain, and JL and racecougar Bracing.
Black '97 Tbird Limited Edition, '02 4R70W, 255 walbro, PST DS, PBR Brakes&SS lines, Toicko Blues & Springs, GrogTune.

I'm not Human enough to be human; but I'm trying to fit in, and I'm learning to fake it.

"Never said Hibbity..." - Brian Williams
Grog6 is offline  
post #14 of 28 (permalink) Old 12-05-2011, 02:31 PM
MaleWhore
 
smokymance's Avatar
 
Join Date: Oct 2003
Location: Commerce , MI
Posts: 2,640
Send a message via AIM to smokymance
Quote:
Originally Posted by Grog6 View Post
First, a Cobra radiator is huge.

To fit the Mustang radiators of all types, use this lower radiator hose:

XR3Z8286AA

That's from here:

http://www.rockauto.com/catalog/rafr...&parttype=2057

Note that's for a "2000 FORD MUSTANG GT 4.6L 281cid V8 FI (X) SOHC "

This has the weird connection to the overflow tank, and has a 1.77" hose end, sized for the Mustang radiators.

This is much easier than stretching our hose from 1.25" to 1.7" and expecting it to last...

Hope this helps someone else!
I will keep this in mind when i order my aftermarket radiator...

1997 MN12 Sport 4.6L Supercharged 5 Speed
1998 Mark VIII LSC Teredor Red, Parts car, PM me
1998 Mark VIII LSC Pearl, Stock, Garage Queen
2000 Jeep XJ 4.0L Lifted
2008 Yukon Denali 6.2L Supercharged
smokymance is offline  
post #15 of 28 (permalink) Old 12-05-2011, 03:36 PM
PostWhore
The AFDB is on a lil tight.
 
Splattered's Avatar
 
Join Date: Mar 2007
Location: is hot
Posts: 3,868
Quote:
Originally Posted by raider82 View Post
Speaking of obscure parts, does anyone know a part number, Ford or otherwise, for a 1995 4.6L V8 PCV valve elbow? It is in the middle or so of the photo, the bright black piece.

I had these elbows turn to cracked up garbage and just replaced the whole line with new hose, second from the smallest size at oriellys. I paid a buck 50 for it, dont need to get all OEM on that part.

Funny how JL either forgot or got too busy to post more. 2 days turns to 2 years.

Spinning pies like wheels.

DD driving my 20 year old project

Now with new ball joints...again
Splattered is offline  
post #16 of 28 (permalink) Old 04-06-2012, 09:21 PM
Converter Guy
 
dirtyd0g's Avatar
 
Join Date: Jul 2004
Location: batavia,oh
Age: 39
Posts: 6,617
Send a message via Yahoo to dirtyd0g
Anybody got the part number for the nipple behind the water pump and the heater pipe to do a PI intake?
Alan

DirtyDog Performance.Com
Proud sponsor of the SC/XR7 Shootout and Joel Bender Memorial Nats

Please do not send me messages on forums they are too hard to keep up with and I don't check in very often anymore call me at 513 898-1580 or email me alan at dirtydogperformance.com
dirtyd0g is offline  
post #17 of 28 (permalink) Old 04-06-2012, 09:29 PM
Seasoned PostWhore
 
theterminator93's Avatar
 
Join Date: Jan 2009
Location: Avon Lake, Ohio
Age: 29
Posts: 8,677
Garage
Coolant Nipple F75Z-8555-AA
Coolant Tube XR3Z-18B402-AA

-Brandon
97 Laser Red Thunderbird LX 156k, Stage 2 4.6L 2v N/A | 300 BHP (255 RWHP, 290 RWTQ) | 13.95 @ 97.58 | Build details | Pics at the Lorain Assembly plant
96 Ivory Mark VIII 235k, stock 4.6 32v on coils; New engine at 185k
Gone but not forgotten: 94 Cougar XR7, 93 Mark VIII

TCCoA's resident pilot since 2014
Once you have tasted flight, you will walk the world with your eyes turned skyward, for there you have been and there you long to return. -Leonardo da Vinci
theterminator93 is offline  
post #18 of 28 (permalink) Old 04-07-2012, 12:11 AM
Boost!!!
 
modularbird's Avatar
 
Join Date: Feb 2010
Location: Gadsden, AL
Age: 30
Posts: 807
i got one you can have if you want it brand new still in the pack that i never used. it's part no. f75z-8555-aa

Blake

1996 thunderbird lx (the silver slut)
http://forums.tccoa.com/vbpicgallery.php?do=view&g=387

modularbird is offline  
post #19 of 28 (permalink) Old 07-12-2013, 03:16 PM
Slightly Disjointed
Super Moderator
 
XR7-4.6's Avatar
 
Join Date: Apr 2006
Location: Roselle IL
Posts: 15,522
Garage
Send a message via Yahoo to XR7-4.6
That was an insightful reply.

-Matt
XR7-4.6 is offline  
post #20 of 28 (permalink) Old 07-23-2013, 02:35 PM
4th Gear Poster
 
Join Date: Dec 2012
Location: lakeland fl
Posts: 255
Here is a part umber for the iac valve tube if you cant find it at a salvage yard.

It is for the ones who might be looking for it.

The part number is f8zz-9h308-aa.

I ran into a hard time looking for it for my self till now when I finally looked it up.
95mercxr7 is offline  
post #21 of 28 (permalink) Old 09-16-2013, 08:15 AM
Newbie
 
Join Date: Aug 2013
Location: Va
Posts: 6
good job
Old Skule is offline  
post #22 of 28 (permalink) Old 04-26-2014, 04:00 PM
4th Gear Poster
 
Join Date: Dec 2012
Location: lakeland fl
Posts: 255
I have two part numbers for the ones who are looking for them

one is WT5058 is for the cross over tube for the coolent. it is not the one that looks like a nipple but the one that a male connector connects to.

that part number is from autozone.

the second one is for the thermostat housing it is the longer ones for the 96 up also for the pi swap it is N811011 S309 from ford.
95mercxr7 is offline  
post #23 of 28 (permalink) Old 05-23-2014, 06:29 AM
Newbie
 
Join Date: May 2014
Location: providence, RI
Posts: 2
does anyone know the numbers for the transmission fluid cooling tube(s)that connect to the radiator. mine are leaking tranny fluid.
paulie0491 is offline  
post #24 of 28 (permalink) Old 05-24-2014, 06:49 PM
PostWhore
 
fast Ed's Avatar
 
Join Date: Oct 2002
Location: Caledon, Ontario ... CANADA !
Posts: 1,548
The connector for the lines at the rad is E2TZ 7D273 A. Lines themselves were a non-serviced part for this application ... you would have to improvise them using 5/16" bulk tubing, or cut out the leaking areas and join the line back together with high pressure flexible hose, double clamped.

cheers
Ed

95 T-Bird SC 5-speed -- SOLD!!
88 T-Bird Turbo Coupe 5-speed
07 Mustang GT 5-speed with some stuff
fast Ed is offline  
post #25 of 28 (permalink) Old 12-01-2014, 05:16 PM
4th Gear Poster
 
Join Date: Dec 2012
Location: lakeland fl
Posts: 255
ok I am looking for the nipple for the air intake tube. it is the thing that the iac connects to the intake tube. the tube that I found when I did the pi intake swap didn't have it on it. I am still looking for that peace of it. what I am using is a temp thing I am worried that I will suck it into the intake manifold. I would get a cold air intake for a mustang gt but I wouldn't know if that would work. thanks for the help
95mercxr7 is offline  
post #26 of 28 (permalink) Old 12-01-2014, 10:45 PM
4th Gear Poster
 
Join Date: Jul 2010
Location: Texas
Posts: 343
Quote:
Originally Posted by 95mercxr7 View Post
ok I am looking for the nipple for the air intake tube. it is the thing that the iac connects to the intake tube. the tube that I found when I did the pi intake swap didn't have it on it.
Did you upgrade to the '96 components while you were doing the swap?
Could #9H308 be what you're looking for?
Torque is offline  
post #27 of 28 (permalink) Old 12-02-2014, 10:57 AM
4th Gear Poster
 
Join Date: Dec 2012
Location: lakeland fl
Posts: 255
I do but that intake tube didn't have that nipple part on it. I also went threw some of the f150s that were there at the salvage yard they didn't have the tubes as well I would have went that rout to button it up. right now I put on a cheap cold air intake on it for a gt mustang so I don't have to worry on sucking in some quick thing but I don't have that ambent air sensor in it. that part is a little big for the tube I have it off.

but I thank you for your help Torque on asking and trying to help.
95mercxr7 is offline  
post #28 of 28 (permalink) Old 01-14-2015, 05:52 PM
4th Gear Poster
 
Join Date: Dec 2012
Location: lakeland fl
Posts: 255
I found that nipple off of another thunderbird I found.

But I do have a question the adapter part number for the manifold to the egr tube any one might know what that is I striped mine out. need another one.

the thunderbird that I came across didn't have the header and egr tube. so I sol thank you for the help
95mercxr7 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the TCCoA Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome