TCCoA Forums banner

5x4.5 hub swap

9K views 19 replies 9 participants last post by  auto alchemist 
#1 ·
can anyone tell me how to do this swap, ive read an article on how to do it but they went into way to much detail and i didnt really understand how to do it after i read it

and can you list what parts from what years of mustang i need
 
#6 ·
Is it possible do use lincoln Mark-III hub's for this swap?
 
#8 ·
Are you serious!!

I thought the mark III was considered a Full-size.
 
#13 ·
ok im bringing tis thread back because i started pricing some stuff for the hub swap and its seems every site i check online when i look for a 99 cobra rear hub assy. it gives me this and from the pic it looks like its just the bearing, heres an example....

http://www.oreillyauto.com/EW3/Prod...d=1200392326540&cycleCount=2465&currentPage=0

so if this is not what i need where did everyone else get their hubs from?
 
#14 ·
It is item #3 in the drawing. (This site is a nice place for "research" because they often have exploded views of a lot of systems.... :D )

http://www.trademotion.com/partloca...P110&callout=3&catalogid=1&displayCatalogid=0

I don't know if any of the auto parts places will carry that hub. You can probably beat their $90 (each) price by shopping around.

Here's a better picture of what you need:
http://cgi.ebay.com/ebaymotors/FORD...QsspagenameZWD1VQQtrksidZp1638Q2em118Q2el1247

I found this on eBay:
http://cgi.ebay.com/ebaymotors/Mark...018QQitemZ280192399191QQrdZ1QQsspagenameZWDVW
 
#15 ·
Check with the ford parts counter here for the hub swap items. I got a GOOD price quote from them when I was doing research on it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top