TCCoA Forums banner

19x9.5 on front

1K views 2 replies 3 participants last post by  XR7-4.6 
#1 ·
I am looking at some wheels that are 19x9.5 +35mm. I know they will fit nicely in the rear but I was wondering​ if anyone has tried that size on the front? Thanks
 
#2 ·
They should fit, I run 18x9 all around, +35, and there is about 1/2" clearance with the top of the spindle. The additional 1/2" in diameter up, and 1/2" inward "should" clear the spindle as it angles inward still. Tire clearance may be an issue, depending on what size tires you run.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top