Parting out a 97 supercharged bird - TCCoA Forums
Reply
 
LinkBack Thread Tools
post #1 of 39 (permalink) Old 12-26-2009, 09:01 AM Thread Starter
1st Gear Poster
 
Join Date: Aug 2002
Location: Orland Park IL
Age: 34
Posts: 47
Thumbs up Parting out a 97 supercharged bird

I'm currently in the sad process of selling my bird. The following parts are for sale.

Vortech V-1 w/bracket
8 rib conversion kit
70mm throttle body
42lb injectors
Front mount air-air intercooler
Polished 3" intercooler piping
Sct handheld tuner
FRPP 3.73 rear end
Entire forged long block w/blower cams
13" front brake kit
And just about anything else on the car.....

P.M. me an offer on any of the above.

Thanks again

'97 block, cobra crank, manley rods, probe pistons, ported and polished PI heads, Manley Valves, SHM 2770 cams, 75mm throttle body, 42lb. Injectors, 90mm Lightning maf,, Vortech V-1 S-Trim, 2.62 pulley, 8 rib, vortech mini-race bypass, FRPP 3.73 rearend, j-modded trans, ssautochrome headers, full 2.5" true dual exhaust, high flow cats, 17" fox fives, 275's, Custom Autometer Gauges, sprint springs

Last edited by nutboy44211; 01-11-2010 at 01:28 PM.
nutboy44211 is offline  
Sponsored Links
Advertisement
 
post #2 of 39 (permalink) Old 12-26-2009, 10:38 AM
Seasoned PostWhore
 
theterminator93's Avatar
 
Join Date: Jan 2009
Location: North Ridgeville, Ohio
Age: 31
Posts: 9,063
Garage
How's the cluster surround? Any broken tabs or scratches etc.?

-Brandon
97 Laser Red Thunderbird LX 162k, Stage 2 4.6L 2v N/A | 300 BHP (255 RWHP, 290 RWTQ) | 13.95 @ 97.58 | Build details | Pics at the Lorain Assembly plant
98 Black Mark VIII 160k, stock daily driver
07 Redfire Fusion V6 SEL 178k, for the wife
Gone but not forgotten: 96 Mark VIII, 94 Cougar XR7, 93 Mark VIII

TCCoA's resident pilot since 2014
Once you have tasted flight, you will walk the world with your eyes turned skyward, for there you have been and there you long to return. -Leonardo da Vinci
theterminator93 is offline  
post #3 of 39 (permalink) Old 12-26-2009, 12:59 PM
Seasoned PostWhore
 
Tbird1997's Avatar
 
Join Date: Feb 2009
Location: Murfreesboro, TN
Age: 27
Posts: 2,134
sorry to hear that your parting her out. sounds like she was one hell of a ride.

which SCT tuner is it? and is it unlocked?

thanks

-Patrick
[email protected] on used street tires
See profile for full list of mods

Pics here.. http://forums.tccoa.com/showthread.php?t=129479
Tbird1997 is offline  
Sponsored Links
Advertisement
 
post #4 of 39 (permalink) Old 12-27-2009, 12:46 AM
 
Join Date: Dec 2009
Posts: 1
i was wondering how much for the vortech and the long block
SR71Tbird is offline  
post #5 of 39 (permalink) Old 12-27-2009, 08:31 AM Thread Starter
1st Gear Poster
 
Join Date: Aug 2002
Location: Orland Park IL
Age: 34
Posts: 47
PM's sent

'97 block, cobra crank, manley rods, probe pistons, ported and polished PI heads, Manley Valves, SHM 2770 cams, 75mm throttle body, 42lb. Injectors, 90mm Lightning maf,, Vortech V-1 S-Trim, 2.62 pulley, 8 rib, vortech mini-race bypass, FRPP 3.73 rearend, j-modded trans, ssautochrome headers, full 2.5" true dual exhaust, high flow cats, 17" fox fives, 275's, Custom Autometer Gauges, sprint springs
nutboy44211 is offline  
post #6 of 39 (permalink) Old 12-27-2009, 09:32 AM
Seasoned PostWhore
 
miller1995's Avatar
 
Join Date: Nov 2002
Location: Orland Park, IL
Posts: 2,806
Send a message via AIM to miller1995
Shoot me a price for the exhaust and differential. I might be interetsed if the price is right and since you are so close.

-Miller

Pearl 97 LX Sport - Purchased Feb. 09 - 5x4.5 Bolt patern, Cobra Brakes, Voghtland spings, Silver FR500's, 3.73's, MMX drive shaft...more to come
Denim Blue 97 Cougar Sport - Purchased Nov. 14 - 22k miles and now the daily driver, staying stock
Purple 95LX Supercharged 4.6PI Parting Out
Black '11 VW Jetta Sportwagen TDI 6-speed - Fun but efficient
SOLDWhite '03 Crown Vic P71
Pearl 96 Lx - Parted and gone, some parts still available
SOLD2006 Mazdaspeed6
SOLD1998 Escort ZX2
RIPBlue 97 LX - MANY PARTS STILL AVAILABLE
RIP My Black 95 LX 4.6
miller1995 is offline  
post #7 of 39 (permalink) Old 12-29-2009, 10:01 PM
WOT Junkie and avid corn burner
 
Mgino96tbird46's Avatar
 
Join Date: Jul 2008
Location: Virginia Beach, VA
Age: 29
Posts: 3,734
how much for the throttle body?

Michael M. ASE P2 Automobile Parts Specialist.

1996 Thunderbird LX. Gone, but not forgotten Oct 1995-March 24 2016 Trick Flow headded, E85 guzzling beast.

1985 Mustang GT. modified stock Holley 4180C, Weiand Street Warrior intake manifold, equal length headers, true dual exhaust, 5 speed, 3.55:1 8.8'' rear end, Ford Racing 10.5" clutch.

1998 Mustang GT premium. Trans Go shift kit, Bassani catted x-pipe, PI heads, cams, intake swap, Accufab elbow, SCT Xcal 4 tune, Eibach Pro-kit, Maximum Motorsports Caster/camber plates, fat tires. Banging audio system.
Mgino96tbird46 is offline  
post #8 of 39 (permalink) Old 01-01-2010, 09:16 PM
6th Gear Poster
 
rednsilver94sc's Avatar
 
Join Date: Nov 2005
Location: Trenton Michigan
Age: 32
Posts: 523
Send a message via AIM to rednsilver94sc
how much for the vortech?
rednsilver94sc is offline  
post #9 of 39 (permalink) Old 01-02-2010, 08:00 AM
4th Gear Poster
 
96tbirdboi's Avatar
 
Join Date: Nov 2008
Location: texas
Posts: 343
how much for the 3 73 rEAREND ????

1996 ford Thunderbird LX 4.6L 2V [email protected]
PI Swap(heads/intake)
Comp 262 cams
Sport springs
True dual exhaust(Magnaflow cats/Mufflers
Steeda UDPs
Trick flow tb/plenum
96tbirdboi is offline  
post #10 of 39 (permalink) Old 01-02-2010, 09:20 AM Thread Starter
1st Gear Poster
 
Join Date: Aug 2002
Location: Orland Park IL
Age: 34
Posts: 47
PM's Sent

'97 block, cobra crank, manley rods, probe pistons, ported and polished PI heads, Manley Valves, SHM 2770 cams, 75mm throttle body, 42lb. Injectors, 90mm Lightning maf,, Vortech V-1 S-Trim, 2.62 pulley, 8 rib, vortech mini-race bypass, FRPP 3.73 rearend, j-modded trans, ssautochrome headers, full 2.5" true dual exhaust, high flow cats, 17" fox fives, 275's, Custom Autometer Gauges, sprint springs
nutboy44211 is offline  
post #11 of 39 (permalink) Old 01-02-2010, 05:33 PM
5th Gear Poster
 
T-bird_fan's Avatar
 
Join Date: Aug 2002
Location: Detroit, Mi
Age: 44
Posts: 475
Send a message via Yahoo to T-bird_fan
How much for the MAF?

J-Mod, MMC D/S, 24k gvw Tranny Cooler, Mark VIII TC,13” KVR Frt brakes, FRPP 3.73 rear, PI cams & Intake plus P&P NPI heads with the cooling mod, 1 3/8" Rr swaybar.
T-bird_fan is offline  
post #12 of 39 (permalink) Old 01-02-2010, 06:17 PM
3rd Gear Poster
 
Lx40thbird's Avatar
 
Join Date: Jul 2008
Location: Worcester,MA
Age: 30
Posts: 163
price on the diff?

95 LX 40th anniv: Retired, but lives as on as a parts car for my 94. If Anyone needs parts let me know

94 LX V8: Lowered, cone filter and removed resonator.
Soon to come: True duals and more
Lx40thbird is offline  
post #13 of 39 (permalink) Old 01-02-2010, 06:33 PM Thread Starter
1st Gear Poster
 
Join Date: Aug 2002
Location: Orland Park IL
Age: 34
Posts: 47
PM's Sent

'97 block, cobra crank, manley rods, probe pistons, ported and polished PI heads, Manley Valves, SHM 2770 cams, 75mm throttle body, 42lb. Injectors, 90mm Lightning maf,, Vortech V-1 S-Trim, 2.62 pulley, 8 rib, vortech mini-race bypass, FRPP 3.73 rearend, j-modded trans, ssautochrome headers, full 2.5" true dual exhaust, high flow cats, 17" fox fives, 275's, Custom Autometer Gauges, sprint springs
nutboy44211 is offline  
post #14 of 39 (permalink) Old 01-02-2010, 06:37 PM
4th Gear Poster
 
Join Date: Feb 2006
Location: terrorZona
Posts: 228
is the rear end still for sale? if so how much to 85374?
goofizzle is offline  
post #15 of 39 (permalink) Old 01-02-2010, 10:05 PM
6th Gear Poster
 
rednsilver94sc's Avatar
 
Join Date: Nov 2005
Location: Trenton Michigan
Age: 32
Posts: 523
Send a message via AIM to rednsilver94sc
price on the vortech?
rednsilver94sc is offline  
post #16 of 39 (permalink) Old 01-04-2010, 08:50 PM
4th Gear Poster
 
96tbirdboi's Avatar
 
Join Date: Nov 2008
Location: texas
Posts: 343
have any kooks headers????

1996 ford Thunderbird LX 4.6L 2V [email protected]
PI Swap(heads/intake)
Comp 262 cams
Sport springs
True dual exhaust(Magnaflow cats/Mufflers
Steeda UDPs
Trick flow tb/plenum
96tbirdboi is offline  
post #17 of 39 (permalink) Old 01-04-2010, 08:57 PM Thread Starter
1st Gear Poster
 
Join Date: Aug 2002
Location: Orland Park IL
Age: 34
Posts: 47
unfortunetly no just the ss autochromes, which have been very good to me btw

'97 block, cobra crank, manley rods, probe pistons, ported and polished PI heads, Manley Valves, SHM 2770 cams, 75mm throttle body, 42lb. Injectors, 90mm Lightning maf,, Vortech V-1 S-Trim, 2.62 pulley, 8 rib, vortech mini-race bypass, FRPP 3.73 rearend, j-modded trans, ssautochrome headers, full 2.5" true dual exhaust, high flow cats, 17" fox fives, 275's, Custom Autometer Gauges, sprint springs
nutboy44211 is offline  
post #18 of 39 (permalink) Old 01-04-2010, 09:11 PM
5th Gear Poster
 
danalba's Avatar
 
Join Date: Jan 2009
Location: bay city michigan
Age: 29
Posts: 433
can you edit what all is sold and also I assume the rear end is trac lok?

MAC CAI/02 STANG MAF/SCT CHIP TUNED BY LONNIE
EIBACH 1.5 LOWERING SPRINGS- BILSTEIN GAS SHOCKS
90 SUPERCOUPE SIDE SKIRTS/REAR
18x9-FRONT: 245 REAR: 275
PI intake/PI cams
355 trac lok
new tune for swapped parts (93 oct)

no longer the owner.... but its still my child its just released into the world....
danalba is offline  
post #19 of 39 (permalink) Old 01-05-2010, 07:44 AM Thread Starter
1st Gear Poster
 
Join Date: Aug 2002
Location: Orland Park IL
Age: 34
Posts: 47
Sold thus far....

Rearend
By-pass Valve
Tail lights

'97 block, cobra crank, manley rods, probe pistons, ported and polished PI heads, Manley Valves, SHM 2770 cams, 75mm throttle body, 42lb. Injectors, 90mm Lightning maf,, Vortech V-1 S-Trim, 2.62 pulley, 8 rib, vortech mini-race bypass, FRPP 3.73 rearend, j-modded trans, ssautochrome headers, full 2.5" true dual exhaust, high flow cats, 17" fox fives, 275's, Custom Autometer Gauges, sprint springs
nutboy44211 is offline  
post #20 of 39 (permalink) Old 01-05-2010, 02:57 PM
Seasoned Veteran Poster
 
Join Date: Sep 2002
Location: Novi, MI
Posts: 967
PM sent regarding 8 rib conversion parts.

MikeB
1997 Thunderbird Sport
5.0L-2V PI S/C
540 RWHP / 492 RWTQ
11.28 @ 123 MPH
MikeB is offline  
post #21 of 39 (permalink) Old 01-05-2010, 07:03 PM
shaken, not stirred
 
stangboy7's Avatar
 
Join Date: Dec 2005
Location: Central Illinois
Age: 37
Posts: 1,219
You have a payment via paypal in case your inbox is full and you didnt get my mesages.

C.Hill

'97 Laser Red T-bird w/ Option 66S - 125,000 miles, stock except for 3.73s Best ET 15.6 @ 88.3
'94 Electric Red T-bird LX V-8- 212,000 miles- SOLD
2005 Ebony Black Excursion Limited 6.0 Diesel STUDDED

"Thinking is the hardest work there is, which is the probable reason so few engage in it."
- Henry Ford

"Opportunity is missed by most people because it is dressed in overalls and looks like work."
- Thomas A. Edison

http://www.tailofthedragon.com <---- A test of driving ability and nerves.
stangboy7 is offline  
post #22 of 39 (permalink) Old 01-05-2010, 09:09 PM Thread Starter
1st Gear Poster
 
Join Date: Aug 2002
Location: Orland Park IL
Age: 34
Posts: 47
Sold thus far....

Rearend
By-pass Valve
Tail lights
Tuner

Thanks again

'97 block, cobra crank, manley rods, probe pistons, ported and polished PI heads, Manley Valves, SHM 2770 cams, 75mm throttle body, 42lb. Injectors, 90mm Lightning maf,, Vortech V-1 S-Trim, 2.62 pulley, 8 rib, vortech mini-race bypass, FRPP 3.73 rearend, j-modded trans, ssautochrome headers, full 2.5" true dual exhaust, high flow cats, 17" fox fives, 275's, Custom Autometer Gauges, sprint springs
nutboy44211 is offline  
post #23 of 39 (permalink) Old 01-06-2010, 12:54 AM
Baby Huey
 
warmaster259's Avatar
 
Join Date: May 2005
Location: Houston,TX
Age: 31
Posts: 3,210
Price on longblock?

Jim

1995 Thunderbird LX: Vortech S-Trim(12psi), Forged PI 4.6, T-45, SCT Tune, Eibach Pro-kit, Magnaflow DI/DO Exhaust, 3.73 TL, and 17" Cobras

1995 Thunderbird SC: Bone Stock
warmaster259 is offline  
post #24 of 39 (permalink) Old 01-06-2010, 10:23 AM Thread Starter
1st Gear Poster
 
Join Date: Aug 2002
Location: Orland Park IL
Age: 34
Posts: 47
PM's sent

'97 block, cobra crank, manley rods, probe pistons, ported and polished PI heads, Manley Valves, SHM 2770 cams, 75mm throttle body, 42lb. Injectors, 90mm Lightning maf,, Vortech V-1 S-Trim, 2.62 pulley, 8 rib, vortech mini-race bypass, FRPP 3.73 rearend, j-modded trans, ssautochrome headers, full 2.5" true dual exhaust, high flow cats, 17" fox fives, 275's, Custom Autometer Gauges, sprint springs
nutboy44211 is offline  
post #25 of 39 (permalink) Old 01-06-2010, 05:55 PM
Seasoned PostWhore
 
Chris_Murder's Avatar
 
Join Date: Sep 2006
Location: Las Vegas, Nevada
Posts: 5,408
Send a message via AIM to Chris_Murder
pm me with a price shipped to 89129 for the 8 rib conversion please

-1996 Pearl White Thunderbird 4.6 Sport 4v with many mods:
Current Best: 13.583 @ 103.74 10/2014.
227hp/241tq measured on calibrated mustang dyno, tested at full vehicle simulation with inertia enabled, no number skewing.
-2001 White Ford F-250 Super Duty 6.8 V10, 4-door, 4x4, Limo Tint, BFG KO2's, Bilstein 7100 Remote Reservoir Race Bypass Shocks, 6" Spring lift, Kenwood Double Din, K&N Intake, FlowMaster Exhaust
Amber_Murder's Daily Driver.
-2005 White GMC Sierra 3500 6.6 Duramax, Dually, 4-door, 4x4, Limo Tint, BFG Commercial T/A's, Rancho RS9000XL Shocks, Kenwood Double Din, K&N Intake, Banks Monster Exhaust
Chris_Murder's Daily Driver.
Chris_Murder is offline  
post #26 of 39 (permalink) Old 01-06-2010, 06:08 PM
The Band, not the Disease!
 
AnthraxBird's Avatar
 
Join Date: Jul 2002
Location: NW Indiana
Age: 34
Posts: 3,090
Send a message via AIM to AnthraxBird
What type of shocks / springs are on the car?

1997 Mark VIII LSC - Toreador Red
AnthraxBird is offline  
post #27 of 39 (permalink) Old 01-06-2010, 07:44 PM Thread Starter
1st Gear Poster
 
Join Date: Aug 2002
Location: Orland Park IL
Age: 34
Posts: 47
Sold thus far....

Rearend
By-pass Valve
Tail lights
Tuner
8-Rib Conversion Kit

Thanks again

'97 block, cobra crank, manley rods, probe pistons, ported and polished PI heads, Manley Valves, SHM 2770 cams, 75mm throttle body, 42lb. Injectors, 90mm Lightning maf,, Vortech V-1 S-Trim, 2.62 pulley, 8 rib, vortech mini-race bypass, FRPP 3.73 rearend, j-modded trans, ssautochrome headers, full 2.5" true dual exhaust, high flow cats, 17" fox fives, 275's, Custom Autometer Gauges, sprint springs
nutboy44211 is offline  
post #28 of 39 (permalink) Old 01-10-2010, 07:55 PM
4th Gear Poster
 
96tbirdboi's Avatar
 
Join Date: Nov 2008
Location: texas
Posts: 343
ill be getting my inome tax soon how much would u let that blower go?????

just curious bout it

not completely interested at the moment

1996 ford Thunderbird LX 4.6L 2V [email protected]
PI Swap(heads/intake)
Comp 262 cams
Sport springs
True dual exhaust(Magnaflow cats/Mufflers
Steeda UDPs
Trick flow tb/plenum
96tbirdboi is offline  
post #29 of 39 (permalink) Old 01-10-2010, 08:49 PM
PostWhore
 
cobra R Thunderbird's Avatar
 
Join Date: Dec 2009
Location: Thomasville GA
Age: 34
Posts: 1,488
PM sent about headers, supercharger/bracket, maf

1995 Tbird ~ 02 explorer SVO 4.6 Sold
1986 built/restored notch body mustang ~ appears as a 91+ built 5.0 gt40p, Ud pullies, ss headers, msd everything, arp head bolts, 1.7 crane roller rockers, B303 cam, Holley carb, high rise intake,5 speed, steeda everything. Sold
2001 GT BULLITT #00762 stock
2000 GT ~ 310 rwhp on mustang dyno. 08 2v, super low miles, comp 262 cams, bbk ud pullies, ported bullitt intake/accufab TB, 24# injectors, dyno tuned, 3inch pypes catless x pipe system, cobra brakes, coated cross & drilled rotors, Cobra r hood, 99-01 cobra front bumper, & 01-04 side scoops, dropped
2003 z71 avalanche fully loaded
cobra R Thunderbird is offline  
post #30 of 39 (permalink) Old 01-11-2010, 12:28 AM
PostWhore
 
seawalkersee's Avatar
 
Join Date: Jan 2004
Location: Outside KCMO
Age: 42
Posts: 1,566
What about the dash surround? Is it damaged or why did not post #2 get it? Price shipped to 64060

SWS

Soon to have some MHS parts, cams, 'luminum block, lower compression, ported heads, autorotor, and need to make long tubes. I have almost all the stuff and need some #42-50s a bypass valve, and maybe a few other things.
seawalkersee is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the TCCoA Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome