03 cobra t-56 / 94 lx mn12 / 02 explorer engine/ 02 mustang gt clutch- sell4cheap! - TCCoA Forums
 
LinkBack Thread Tools
post #1 of 24 (permalink) Old 12-23-2010, 06:23 AM Thread Starter
2nd Gear Poster
 
Join Date: Jul 2004
Location: So Cal
Age: 33
Posts: 87
03 cobra t-56 / 94 lx mn12 / 02 explorer engine/ 02 mustang gt clutch- sell4cheap!

I have a 94 t-bird 4.6LX. It had 80k miles on it and in great condition minus a rod bearing. Im not trying to sell that engine though..


Prices are for best offer

tremec T-56 (sold)

94 thunderbird LX 80k (part out- it's complete minus engine and trans thus far) Its in very good condition and was not abused before i drove it for 9 months.... {has a pioneer deck with speakers i installed w my custom speaker mounts in front.. cost me total of $350 for everything but i wouldn't expect but a few dollars}

The explorer engine is ready to install into thunderbird. 2002 explorer 4.6L from a test vehicle with about 13K on it. It has currently installed all the t-bird sensors, crower II cams, Kooks jet hot coated headers, 97 tbird fuel rails new from ford, higher flow injectors for the cams etc..and i have a new 255ips fuel pump.

I think the brand was fidanza for the clutch kit.. Clutch/flywheel/press plate stage 2 for a 2002 mustang gt. Fits the t-56 trans and the 4.6 engine is why i used them. New in box.

It had some mustang alarm on it i was told, and the keyless entry.

I need to get rid of everything in the next few months. i expect something around 1500 for trans ( 0 miles on it ) same or less for engine. car parts however, if i dont get rid of them the whole thing is going to junk yard. Car only has 80k miles on it and was in great condition minus a rod bearing in the old engine, not the one im selling( i should have done a rebuild instead of modify OMG..)

661-992-5299
[email protected]
Thank you all,
Chris

Location: southern california

Last edited by tbirdkilla; 04-05-2011 at 08:51 PM. Reason: sold trans.
tbirdkilla is offline  
Sponsored Links
Advertisement
 
post #2 of 24 (permalink) Old 12-23-2010, 05:33 PM
PostWhore
 
Join Date: Apr 2008
Posts: 1,716
Send a message via Yahoo to 94 Thunderbird XX
PM sent for 94 parts...

Delete my account.
94 Thunderbird XX is offline  
post #3 of 24 (permalink) Old 12-24-2010, 05:38 PM
Veteran Poster
 
paintme205's Avatar
 
Join Date: Jul 2005
Location: lawton ok
Age: 34
Posts: 836
Can you email pics of the motor to [email protected] ?

96 v8 4.6 explorer, kooks headers, off road x, magnaflow mufflers, cl tb/plenum, lmaf, gt tube, xcal tune, alum shaft, 3800 dirty dog converter, darrin trans, 373 gears, hoosier slicks on fanblades, pbr brakes, Skinnies on front, No PS or AC, Aeromotive EWP, major weight removal (3380 LBS), 12.78 OLD COMBO.
paintme205 is offline  
Sponsored Links
Advertisement
 
post #4 of 24 (permalink) Old 01-10-2011, 11:21 AM
Banned
 
91bluecoupe's Avatar
 
Join Date: Feb 2004
Location: NOT HOME
Posts: 998
I sent this link to a friend who is looking for a 255 fuel pump.
91bluecoupe is offline  
post #5 of 24 (permalink) Old 01-10-2011, 11:37 AM
PostWhore
 
cobra R Thunderbird's Avatar
 
Join Date: Dec 2009
Location: Thomasville GA
Age: 34
Posts: 1,488
Sending PM on fuel pump....

1995 Tbird ~ 02 explorer SVO 4.6 Sold
1986 built/restored notch body mustang ~ appears as a 91+ built 5.0 gt40p, Ud pullies, ss headers, msd everything, arp head bolts, 1.7 crane roller rockers, B303 cam, Holley carb, high rise intake,5 speed, steeda everything. Sold
2001 GT BULLITT #00762 stock
2000 GT ~ 310 rwhp on mustang dyno. 08 2v, super low miles, comp 262 cams, bbk ud pullies, ported bullitt intake/accufab TB, 24# injectors, dyno tuned, 3inch pypes catless x pipe system, cobra brakes, coated cross & drilled rotors, Cobra r hood, 99-01 cobra front bumper, & 01-04 side scoops, dropped
2003 z71 avalanche fully loaded
cobra R Thunderbird is offline  
post #6 of 24 (permalink) Old 02-04-2011, 12:41 PM Thread Starter
2nd Gear Poster
 
Join Date: Jul 2004
Location: So Cal
Age: 33
Posts: 87
situation is: car is at parents house many states away from me. Cannot get my dad to do anything to car so i can not sell any parts at the moment.
tbirdkilla is offline  
post #7 of 24 (permalink) Old 02-04-2011, 01:00 PM Thread Starter
2nd Gear Poster
 
Join Date: Jul 2004
Location: So Cal
Age: 33
Posts: 87
taking in consideration my previous post.. I sent you the engine pics...
tbirdkilla is offline  
post #8 of 24 (permalink) Old 02-10-2011, 09:53 PM
PostWhore
The AFDB is on a lil tight.
 
Splattered's Avatar
 
Join Date: Mar 2007
Location: is hot
Posts: 3,868
I'm really interested in the engine. I'd have to drive and get it though how far are you from phoenix?

Spinning pies like wheels.

DD driving my 20 year old project

Now with new ball joints...again
Splattered is offline  
post #9 of 24 (permalink) Old 02-11-2011, 07:43 AM
Seasoned PostWhore
 
NetKeym's Avatar
 
Join Date: Aug 2009
Location: Florida
Posts: 5,862
Quote:
Originally Posted by tbirdkilla View Post
situation is: car is at parents house many states away from me. Cannot get my dad to do anything to car so i can not sell any parts at the moment.
Well, where is the car? Is it possible to see it? I'll be traveling for my job from Alabama to South Carolina to Louisiana during the next few weeks...

~Rick

TCCoA Sig
NetKeym is offline  
post #10 of 24 (permalink) Old 02-14-2011, 12:16 AM
3rd Gear Poster
 
kev0's Avatar
 
Join Date: Jan 2010
Location: Mesquite, TX
Age: 28
Posts: 171
Would you consider shipping the engine to texas? I would be interested in a price and picture.

1995 Thunderbird LX V8 (Zapdos)

-kev0
kev0 is offline  
post #11 of 24 (permalink) Old 02-14-2011, 04:48 PM
Beer and Cheese
 
OxmanWI's Avatar
 
Join Date: Nov 2003
Location: Milwaukee, WI
Posts: 7,386
Garage
How "many" states are we talking about here? pictures Of the engine to [email protected]

God Bless the men & women who have served and serving to keep us free
OxmanWI is offline  
post #12 of 24 (permalink) Old 02-14-2011, 06:03 PM
PostWhore
The AFDB is on a lil tight.
 
Splattered's Avatar
 
Join Date: Mar 2007
Location: is hot
Posts: 3,868
Man count me out this guy is doing some micky mouse BS here. If he wanted these items moved he would have pics posted and at least been more responsive. Itsn ot like he is selling a cup holder either. Do you or do you NOT want to make a sale this year. Lets see pics and answers. I have a feeling the engine isn't near me anyway, maybe its on mars.

Spinning pies like wheels.

DD driving my 20 year old project

Now with new ball joints...again
Splattered is offline  
post #13 of 24 (permalink) Old 02-15-2011, 07:07 PM
PostWhore
 
Join Date: Apr 2008
Posts: 1,716
Send a message via Yahoo to 94 Thunderbird XX
Quote:
Originally Posted by Splattered View Post
Man count me out this guy is doing some micky mouse BS here. If he wanted these items moved he would have pics posted and at least been more responsive. Itsn ot like he is selling a cup holder either. Do you or do you NOT want to make a sale this year. Lets see pics and answers. I have a feeling the engine isn't near me anyway, maybe its on mars.
+1
Can't sell what you don't have.

But he did say:
Quote:
Originally Posted by tbirdkilla View Post
situation is: car is at parents house many states away from me. Cannot get my dad to do anything to car so i can not sell any parts at the moment.

Delete my account.
94 Thunderbird XX is offline  
post #14 of 24 (permalink) Old 02-15-2011, 08:47 PM
Veteran Poster
 
paintme205's Avatar
 
Join Date: Jul 2005
Location: lawton ok
Age: 34
Posts: 836
Quote:
Originally Posted by 94 Thunderbird XX View Post
+1
Can't sell what you don't have.

But he did say:
Relax and read a little guys. He can't get to anything currently and his family won't help with shipping or pickup arrangements. I got an email from him a couple days ago. Honestly I would just wait and see if he can get things figured out. I am sure he will post when the stuff is available to ship or pickup.

96 v8 4.6 explorer, kooks headers, off road x, magnaflow mufflers, cl tb/plenum, lmaf, gt tube, xcal tune, alum shaft, 3800 dirty dog converter, darrin trans, 373 gears, hoosier slicks on fanblades, pbr brakes, Skinnies on front, No PS or AC, Aeromotive EWP, major weight removal (3380 LBS), 12.78 OLD COMBO.
paintme205 is offline  
post #15 of 24 (permalink) Old 03-11-2011, 04:56 AM Thread Starter
2nd Gear Poster
 
Join Date: Jul 2004
Location: So Cal
Age: 33
Posts: 87
apologise for not replying on here. I did not realise i had activity. I thought it was supposed to email me but i dont see any.. Anyways, as i see it now, if you can pick up parts, or help me figure out how to arrange part to be shipped or picked up, then we can begin to process the transactions. What i am trying to say is i have me who is in Texas, the car in southern california, and my setp mom with keys to the garage and car. She cannot help with much more than to unlock these things. Now my dad works out of state so i cannot catch him for a moment to help on this. I am not sure of a shipping company that will do everything, walking in back yard to find parts etc, but i do not know.. Im pretty busy with work and school and am about to move again. The best way to contact me is email, i get it sent to phone: [email protected] although i will try to log on here more often..

To those of you who were requesting pics. I will try to get on that today. I am at work right now and plan to work on that 460 today to get it tuned up : )

edit: maybe ill just throw pics on geocities or imagshack...

Last edited by tbirdkilla; 03-11-2011 at 06:07 AM.
tbirdkilla is offline  
post #16 of 24 (permalink) Old 03-11-2011, 11:47 AM
PostWhore
The AFDB is on a lil tight.
 
Splattered's Avatar
 
Join Date: Mar 2007
Location: is hot
Posts: 3,868
Id still love to get the engine but I just dropped 1300 on my teeth so there goes any money I had sorry hey free bump on some go fast parts.

Spinning pies like wheels.

DD driving my 20 year old project

Now with new ball joints...again
Splattered is offline  
post #17 of 24 (permalink) Old 03-11-2011, 08:19 PM
3rd Gear Poster
 
96thunder4.6's Avatar
 
Join Date: Jun 2010
Location: San Diego Ca
Posts: 146
hey what part of southern cali are you from?

1996 Thunderbird LX 4.6 Cobra R 17x7 Wrapped with 245/45 Eibachs, Air Silencer Delete, Intake,Exhaust. Its fun and still strong.
96thunder4.6 is offline  
post #18 of 24 (permalink) Old 03-17-2011, 05:49 AM Thread Starter
2nd Gear Poster
 
Join Date: Jul 2004
Location: So Cal
Age: 33
Posts: 87
i see your in san diego.. lucky SOB.. i lived there a year until i moved to texas. car is 3 hrs north of u in palmdale. 93550

im getting on those pics right now.. my phone internet is going way slow so this is taking forever!!!
tbirdkilla is offline  
post #19 of 24 (permalink) Old 03-17-2011, 06:45 AM Thread Starter
2nd Gear Poster
 
Join Date: Jul 2004
Location: So Cal
Age: 33
Posts: 87
i have trans and car pics too but will take care of that stuff upon request..


By tbirdkilla


By tbirdkilla ^STOCK EXPLORER FRONT COVER


By tbirdkilla ^EXPLORER ENGINE BEFORE CONVERSION


By tbirdkilla ^EXPLORER ENGINE BEFORE CONVERSION 2


By tbirdkilla ^EXPLORER ENGINE BEFORE CONVERSION 3


By tbirdkilla ^CURRENT EXPLODER ENGINE WITH TBIRD FRONT COVER, CROWER II CAMS, SPRINGS FOR THE CAMS, TBIRD SENSORS, TBIRD VALVE COVERS(TRYING TO MAKE IT LOOK STOCK TBIRD), 97 TBIRD FUEL RAILS, HIGHER FLOW INJCTORS.. read my first post to see if i missed any modifications on engine....?..


By tbirdkilla ^another angle of current explorer engine

Last edited by tbirdkilla; 03-18-2011 at 03:03 AM.
tbirdkilla is offline  
post #20 of 24 (permalink) Old 03-21-2011, 06:38 PM
PostWhore
 
cobra R Thunderbird's Avatar
 
Join Date: Dec 2009
Location: Thomasville GA
Age: 34
Posts: 1,488
What's the best deal you can do on the t56?

1995 Tbird ~ 02 explorer SVO 4.6 Sold
1986 built/restored notch body mustang ~ appears as a 91+ built 5.0 gt40p, Ud pullies, ss headers, msd everything, arp head bolts, 1.7 crane roller rockers, B303 cam, Holley carb, high rise intake,5 speed, steeda everything. Sold
2001 GT BULLITT #00762 stock
2000 GT ~ 310 rwhp on mustang dyno. 08 2v, super low miles, comp 262 cams, bbk ud pullies, ported bullitt intake/accufab TB, 24# injectors, dyno tuned, 3inch pypes catless x pipe system, cobra brakes, coated cross & drilled rotors, Cobra r hood, 99-01 cobra front bumper, & 01-04 side scoops, dropped
2003 z71 avalanche fully loaded
cobra R Thunderbird is offline  
post #21 of 24 (permalink) Old 03-21-2011, 07:30 PM Thread Starter
2nd Gear Poster
 
Join Date: Jul 2004
Location: So Cal
Age: 33
Posts: 87
675.00 plies shipping unless u can pick it up.
tbirdkilla is offline  
post #22 of 24 (permalink) Old 03-21-2011, 09:55 PM
PostWhore
 
cobra R Thunderbird's Avatar
 
Join Date: Dec 2009
Location: Thomasville GA
Age: 34
Posts: 1,488
How much is shipping to 32303?

1995 Tbird ~ 02 explorer SVO 4.6 Sold
1986 built/restored notch body mustang ~ appears as a 91+ built 5.0 gt40p, Ud pullies, ss headers, msd everything, arp head bolts, 1.7 crane roller rockers, B303 cam, Holley carb, high rise intake,5 speed, steeda everything. Sold
2001 GT BULLITT #00762 stock
2000 GT ~ 310 rwhp on mustang dyno. 08 2v, super low miles, comp 262 cams, bbk ud pullies, ported bullitt intake/accufab TB, 24# injectors, dyno tuned, 3inch pypes catless x pipe system, cobra brakes, coated cross & drilled rotors, Cobra r hood, 99-01 cobra front bumper, & 01-04 side scoops, dropped
2003 z71 avalanche fully loaded
cobra R Thunderbird is offline  
post #23 of 24 (permalink) Old 03-22-2011, 08:33 PM Thread Starter
2nd Gear Poster
 
Join Date: Jul 2004
Location: So Cal
Age: 33
Posts: 87
fedex @ 4'x2'x2' @100ibs is $182.80...

if that quote is somewhat accurate then ill accept $850 shipped. or you can directly pay the shipping. i can look more into finding a cheaper shipper but right now i have 2 laptops im supposed to fix. Supposedly my dad will get the actual dimension and weight on friday 3/25/11.

let me know whats going on:
here, or
text/call 6619925299
email:[email protected]

( i can call up some old friends and give them a few dollars in gas to get things rollings as far as finding the trans in garage ETC... ) im just not trying to pay out of pocket until something is rolling because im trying to fix my car before i run out of money with these gas prices and my thirsty truck 9-10mpg)

Last edited by tbirdkilla; 03-22-2011 at 08:44 PM.
tbirdkilla is offline  
post #24 of 24 (permalink) Old 04-05-2011, 09:00 PM Thread Starter
2nd Gear Poster
 
Join Date: Jul 2004
Location: So Cal
Age: 33
Posts: 87
Bump****

transmission has been sold, i have edited my first post.

I am trying this again and hope that my counter parts will be reliable (family).

Will sell everything on this Thunderbird for cheep. It had i think 94k on it... but seriously it was in exceptional shape. I am selling parts that are easy to take off only. I would do some damage, but its not me pulling the parts off...!.. (pm me) . My family is motivated, finally, to help me part it out. I am trying to get more than junk yard/ scrap metal will get me. This car was in amazing shape minus the rod bearing and my stupidity in trying to modify it so much and do college at same time..

2002 explorer engine(from test vehicle estimated at 13k) is ready to be put into obd1 Thunderbird. Brand new factory fuel rails $270 (wow) crower 2 cams installed for extra power, AAMCO swapped all Thunderbird sensors and ensured cams installed correctly etc... cams cost me i think $350 alone, plus springs..

Last edited by tbirdkilla; 08-08-2011 at 08:53 PM.
tbirdkilla is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the TCCoA Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome