Miscellaneous Parts (2V; 94-97) - TCCoA Forums
 
LinkBack Thread Tools
post #1 of 10 (permalink) Old 03-05-2015, 01:54 PM Thread Starter
1st Gear Poster
 
ebecker54's Avatar
 
Join Date: Jun 2013
Location: Beavercreek, OH
Age: 31
Posts: 33
Miscellaneous Parts (2V; 94-97)

Hello all,

After selling my '97, I have some parts left over that I've finally decided to gather to sell. I have pictures attached but here is a list with prices. If you'd like to buy everything, I think $400 is a fair price.

PLEASE NOTE, buyers must pay shipping from 45431 (Beavercreek, OH) unless you'd like to pick anything up. For anyone wishing to pick anything up, reply in the thread first or follow forum rules, then proceed to message me for address information.

PLEASE NOTE, any [used] OEM parts have roughly 60k miles on them.

- 1996 center console (with toggle switch holes drilled in coin slots) - $20
- Radio console - $5
- SuperCoupe Performance CAI, ceramic coated black (Eastwood) - $75
- New Oil Pan gasket (2V) - $5
- New Oil Filter Adapter gasket (2V with no oil cooler; so 99% of you) - Free add-on item, must buy with something else
- New Oil Plug drain bolt - Free add-on item, must buy with something else
- Crankcase Vent crossover tube - Free add-on item, must buy with something else
- New Energy Suspension 1 1/6-inch PU front sway bar bushings and brackets (9.5169R) - $12
- New Fram oil filter - Free add-on item, must buy with something else
- OEM Chassis/Exhaust guard brace - $15
- Replacement heater hose (88396) - $5
- New Moog Rear LCA to Subframe bushings - $10
- OEM Rear end links with poly bushings with stock brackets, with misc. bolts, studs, washers for upgrading to ES poly bushings with bigger sway bar - $5
- 4-inch MAF adapter (3.5-inch-sq bolt pattern) - Free add-on item, must buy with something else
- OEM trigger wheel - $10
- OEM crank gears - $5
- New Viton valve stem seals (PI and NPI) - $20
- [SOLD] Custom COP conversion kit with Motorcraft coils (true plug and play; clean up that engine bay) - $100
- New dual pattern (5x4.25/5x4.5) Amico 13" front brake rotors (from discbrakesrus.com) - $80

NOT PICTURED (reply with request for pictures):
- Assembled NPI heads (with OEM valvetrain and stock cams); were removed as part of engine build - $150
- OEM Torque Converter; swapped as part of drivetrain build - $40
- ADDCO 1 3/8-inch front sway bar; never used but shop tried to install, either techs were really stupid or the subframe will need notched - $125












Thanks, Eric

Last edited by ebecker54; 03-20-2015 at 10:43 AM. Reason: Sold items
ebecker54 is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 03-05-2015, 05:51 PM
3rd Gear Poster
 
Draetech09's Avatar
 
Join Date: Sep 2009
Location: Anchorage Alaska
Posts: 179
Sent PM about shipment of Coil on Plug conversion kit to 75007.

Thanks,
Drae

If you Fail to plan, then you plan to Fail!
I'll forever bleed Ford Blue

Drae
Draetech09 is offline  
post #3 of 10 (permalink) Old 03-08-2015, 06:58 PM Thread Starter
1st Gear Poster
 
ebecker54's Avatar
 
Join Date: Jun 2013
Location: Beavercreek, OH
Age: 31
Posts: 33
Drae, sorry it took me all weekend to respond. I've had a few responses on the COP conversion harness, but you're first in line.

The whole kit is about 5 pounds, and I'd ship UPS in whatever packaging the buyer would like, so you'll have to calculate shipping on your end, sorry.

For the other few who've inquired about the COP kit, I will follow-up in the order everyone responded, thanks.

- Eric
ebecker54 is offline  
Sponsored Links
Advertisement
 
post #4 of 10 (permalink) Old 03-09-2015, 07:09 AM
Newbie
 
riffraff999's Avatar
 
Join Date: Feb 2014
Location: York, PA
Posts: 15
Knuckle bushings

I'll take the knuckle bushings and the bump stops, shipping would be to 17315.
riffraff999 is offline  
post #5 of 10 (permalink) Old 03-09-2015, 11:57 AM
50 years of Mercury Cougar 1967/2017
 
r429460's Avatar
 
Join Date: Jun 2007
Location: Davie, Fla.
Posts: 1,246
I'll take the Yorkie!

Quickest N/A Modular MN12.
1995 XR7-11.77 @ 113.29 (3537 lbs.)
01/31/18 PBIR
THE danner EATER
r429460 is offline  
post #6 of 10 (permalink) Old 03-09-2015, 08:23 PM
3rd Gear Poster
 
Draetech09's Avatar
 
Join Date: Sep 2009
Location: Anchorage Alaska
Posts: 179
Damn I'm glad I was first. I PMed you about it. I'm not letting this kit go. Perfect timing for the new to me PI motor.

If you Fail to plan, then you plan to Fail!
I'll forever bleed Ford Blue

Drae
Draetech09 is offline  
post #7 of 10 (permalink) Old 03-11-2015, 11:03 AM Thread Starter
1st Gear Poster
 
ebecker54's Avatar
 
Join Date: Jun 2013
Location: Beavercreek, OH
Age: 31
Posts: 33
I just caught the Yorkie reply, lol well played. He comes with food, supply your own water.

I'm adding another picture of the headlamp and corner lamp as requested via a private message. The corner lamp is very clear; I swapped them for a set of clear corners. The headlamps were swapped for newer but just before were sanded and polished, then clear coated with UV clear, so I'm not sure how much of the haze is due to the clear and how much is due to old age, but they don't look bad for $15 total.

I'm also adding a pair of DEA #A2995 Hydraulic Motor Mounts (4.6 2V), never used,that I forgot I had. I will sell the pair for $40 in a flat rate USPS box.



ebecker54 is offline  
post #8 of 10 (permalink) Old 03-11-2015, 03:14 PM Thread Starter
1st Gear Poster
 
ebecker54's Avatar
 
Join Date: Jun 2013
Location: Beavercreek, OH
Age: 31
Posts: 33
Additional Items for Sale

The rear UCA to knuckle bushings and bump stops have been sold.

ALSO FOR SALE (Pictures upon request):

- 1.5 sets (I lost half a set...) of Stage 8 Locking Header Bolts, never used - $30

- PI Alternator (PI or NPI Intake to PI Alternator) bracket - $10

- Set of 4 Cragar S/S FWD 17x7 (5x4.25/5x4.5 dual pattern; +40 offset); currently Plasti-dipped black but were ceramic-painted black, but original color was I believe charcoal - HOWEVER - one wheel is severely damaged on lip, and I doubt it's repairable - $150 PICK UP ONLY (45431) - again, pictures upon request

Last edited by ebecker54; 03-12-2015 at 08:14 AM. Reason: Items sold
ebecker54 is offline  
post #9 of 10 (permalink) Old 03-12-2015, 04:21 PM
Newbie
 
Join Date: Mar 2015
Location: Chattanooga tn
Posts: 4
Is the torque converter stock or upgraded and if it's a performance party how much do you want for it
alyster94lx is offline  
post #10 of 10 (permalink) Old 03-20-2015, 09:21 AM
1st Gear Poster
 
Join Date: Aug 2011
Location: Fries, VA
Posts: 42
Do you still have the valve seals and rotors???
unciet is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the TCCoA Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome