TCCoA Forums banner

torq-thrust 2 backspacing

651 views 5 replies 5 participants last post by  MarksM 
#1 ·
well, I know that the bullitt wheels have about the same look but the differences beetween the two are what I love about the tt2. I ended up ordering the tt2 18x8 with a 5.25 backspacing. I am assuming that they are going to fit since they are the only size close enough to what I need. Is a 28mm offset the same as 5.25 backspacing? tim
 
#6 ·
Offset is the measurement from the hub mounting surface to the centerline of the wheel.

Backspacing is the measurement from the hub mounting surface to the outside edge of the inside of the wheel.

One also has to keep in mind that an 8" wheel is in reality roughly 9" wide overall. Width is measured on the inside of the bead.

 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top