posted a week or two ago about selling a accufab 75mm tb and spacer, well they sold. and in their place was a 90mm tb and spacer. these two pieces are huge compared to the 75's. i was happy to get 'em, but sad when i bolted them up to the inlet manifold on the kb. i didnt realise it was that much of a difference in size between the opening on the inlets. it was perfect with the 75 but 90 is massive. now i gotta find a flowzilla manifold(:yes, or port the stock inlet to a 90mm opening. well anyhow enough typing time for some pics.
oh and if you guys know of anyone with a flowzilla forsale drop me a im or email with info. kinda need one soon. disney's gettin anxious to get 'er done. or if theres any members who have one that might waana trade plus some cash(TTMARKVII) let me know.
finally got around to getting the inlet opened up to a 90mm opening. came out okay. had to epoxy it on the bottom to close off the egr passage on the back, then smooth all that out. just need to clean up some in the intake and that should be it. let me know what ya'll think.
who does your chrome plating and polishing? im liking those heater tubes.
A1 chrome over by hobby airport. you know chris actually repolished the manifolds and they were a tad bit more reflective.
hey mike if you notice on mine i cut of the lil nipple and welded it also. the one that goes to the egr spacer. but if you check this link out you might save some cash cause he has both the heater tube with or without nipple. and they come polished, or chrome i believe.